Exhaust Thru Hull Instructions
Exhaust Thru-Hull – Installation Instructions
Ensure all exhaust components are cool and the heater is disconnected from power.
1. Drill Mounting Hole
- Drill a 1.5 inch hole in the desired wall location.
- Insert the Thru-Hull from the outside and mark bolt holes.
2. Install Outer Gasket
- Remove the Thru-Hull and slide the rubber gasket onto it.
- Align bolt holes and reinsert from the outside.
3. Install Inner Gasket
- On the inside wall, slide on the metal plate and rubber gasket.
- Ensure the rubber gasket is against the wall.
4. Secure Thru-Hull
- Install nuts and tighten evenly.
5. Connect Exhaust Pipe
- Ensure exhaust pipe slopes downward toward the Thru-Hull.
- Avoid sharp bends to reduce restriction.
- Slide exhaust pipe fully onto the Thru-Hull for a tight seal.
- Monitor periodically to ensure no exhaust leakage.
By purchasing and installing this product, you agree to the Polar Pal Sales Terms & Conditions