Temperature Sensor Replacement – Installation Instructions

1. Remove Protective Shell

• Remove 12 screws and take off the shell.

2. Open Housing

• Remove intake grate cap and lift off top housing.

3. Remove Sensor Retaining Bar

• Use pliers to remove the metal retaining bar.

4. Replace Sensor

• Disconnect old sensor from motherboard.
• Connect new temperature sensor.

5. Reinstall Sensor

• Ensure sensor sits flush in same location.
• Reinstall retaining bar with pliers.

6. Reassemble

• Reinstall housing and intake grate.
• Reinstall protective shell and reconnect power.

By purchasing and installing this product, you agree to the Polar Pal Sales Terms & Conditions